Author Topic: Powerbronze Hot Product - CB500X Hugger  (Read 1889 times)

0 Members and 1 Guest are viewing this topic.

Offline RichardPB

  • Approved Forum Vendor
  • CB500X Member
  • *
  • Topic Author
  • Posts: 21
  • Country: gb
Powerbronze Hot Product - CB500X Hugger
on: April 16, 2020, 03:23:32 PM
Hi Everyone,

I hope you are all well ?

Have you seen our stylish Powerbronze rear hugger for your CB500X 2019-2020 ?

A must have product for your bike, huggers are designed to enhance the look of your bike while offering the practical advantage of reduced spray over the rear end of your machine.

- Made from High impact plastic for a smooth internal finish.
- No cutting or modification
- Supplied with bike specific fitting kit
- Designed and manufactured by Powerbronze in Great Britain
- "Posi-Flex" steel sleeved rubber mounting points to dampen vibration and avoid stress cracking
- Does not require painting
- UV protected to avoid sun damage
- Same day dispatch if ordered before midday (*)
- International shipping available
- Order with confidence direct from the manufacturer
- TUV & ABE Approved

* In stock items only

Click here to order from our UK website :
https://www.powerbronze.co.uk/honda-cb500f-19-cb500x-19-cbr500r-19-301-h114.html





Enter discount code UKFORUM1 to claim your 10% off at the cart page as shown in the screenshot below.



Free UK mainland delivery on orders over 100.

Please ensure you enter a contact telephone number on all orders.

Stay safe everyone.

All the best,
Richard

Offline Muirman

  • CB500X Newbie
  • *
  • Posts: 2
  • Country: gb
Re: Powerbronze Hot Product - CB500X Hugger
Reply #1 on: December 27, 2020, 11:34:30 AM
Have just fitted this hugger to my 2019 CB500X. Fits accurately. Its a little fiddly on the exhaust side, with very close tolerances but it certainly fits. Seems sturdy without too much flex and very light.
Nice product.

Offline drjack

  • CB500X Pro
  • ***
  • Posts: 313
  • Bike: 2016 CB500X
  • Country: us
Re: Powerbronze Hot Product - CB500X Hugger
Reply #2 on: February 25, 2021, 10:51:31 AM
Does this hugger provide spray protection for the rear shock? Some I've seen don't extend far enough down in front to protect the shock.
Thanks,
Jack
The intelligent rider uses a quiet pipe.
Current bikes: 2016 CB500X, 2005 400EXC

Offline Muirman

  • CB500X Newbie
  • *
  • Posts: 2
  • Country: gb
Re: Powerbronze Hot Product - CB500X Hugger
Reply #3 on: February 25, 2021, 07:00:50 PM
The Powerbronze hugger goes all the way down to meet with the swingarm, so the rear shock is completely protected from direct spray. Of course there is always some spray from the exposed tyre at the rear which swirls around. Clean shock so far.

Offline drjack

  • CB500X Pro
  • ***
  • Posts: 313
  • Bike: 2016 CB500X
  • Country: us
Re: Powerbronze Hot Product - CB500X Hugger
Reply #4 on: February 25, 2021, 07:07:05 PM
Thanks, just the info I was looking for.
Ride safe,
Jack
The intelligent rider uses a quiet pipe.
Current bikes: 2016 CB500X, 2005 400EXC

Offline RichardPB

  • Approved Forum Vendor
  • CB500X Member
  • *
  • Topic Author
  • Posts: 21
  • Country: gb
Re: Powerbronze Hot Product - CB500X Hugger
Reply #5 on: February 26, 2021, 09:13:28 AM
*Originally Posted by Muirman [+]
The Powerbronze hugger goes all the way down to meet with the swingarm, so the rear shock is completely protected from direct spray. Of course there is always some spray from the exposed tyre at the rear which swirls around. Clean shock so far.

Hello Muirman,

Thank you for answering this.

All the best,
Richard


*Originally Posted by drjack [+]
Thanks, just the info I was looking for.
Ride safe,
Jack

Hello Jack,

I'm glad you got the information you needed.

I was involved in some work away from my desk yesterday and was going to answer your query this morning.

All the best,
Richard

 


victorious-backstage