Author Topic: Help Me Accessories My 2020  (Read 6256 times)

0 Members and 1 Guest are viewing this topic.

Offline Oyley

  • CB500X Master
  • ****
  • Posts: 526
  • Bike: CB500x 2019
  • Country: gb
Re: Help Me Accessories My 2020
Reply #110 on: May 27, 2020, 04:44:39 PM
Well...they are on the dining side of the counter top..so that's pretty normal around here  :001:

Offline johnthebigadv

  • CB500X Pro
  • ***
  • Posts: 119
  • Country: gb
Re: Help Me Accessories My 2020
Reply #111 on: May 27, 2020, 09:23:42 PM
*Originally Posted by Ruggybuggy [+]
My foot pegs and wind deflectors showed up today and I got them fitted.  The foot pegs and designed for the BMW motorcycle but with some creative grinding they work out quite well.  I really didn't like the Honda foot pegs.  They just didn't seem big enough.  The BMW pegs feel much more secure and at $60 USD they are a good buy.

https://www.ebay.com/itm/Stainless-Steel-Front-Foot-pegs-Rest-Pegs-Rests-For-BMW-R1200GS-ADV-R1150GS-ADV/182473232194?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2648

In these pictures you can see the material I removed.





Those foot pegs look really good, they also look like they pivot to a certain extent. 

Last Edit: May 27, 2020, 09:26:17 PM by johnthebigadv

Offline Oyley

  • CB500X Master
  • ****
  • Posts: 526
  • Bike: CB500x 2019
  • Country: gb
Re: Help Me Accessories My 2020
Reply #112 on: May 27, 2020, 09:27:34 PM
They look like a copy of Pivot Pegs

Offline Ruggybuggy

  • CB500X Pro
  • ***
  • Topic Author
  • Posts: 296
  • Country: ca
Re: Help Me Accessories My 2020
Reply #113 on: May 27, 2020, 10:53:16 PM
Yes they are pivoting pegs but understand there is a certain amount of fabrication required for proper fitting.  Not hard if your handy.
Last Edit: May 27, 2020, 10:55:38 PM by Ruggybuggy

Offline Oyley

  • CB500X Master
  • ****
  • Posts: 526
  • Bike: CB500x 2019
  • Country: gb
Re: Help Me Accessories My 2020
Reply #114 on: May 27, 2020, 11:00:16 PM
Were the pins the same diameter?
I will add to that,were the holes in the pivoting pegs the same size and did you use the Honda pins?
Last Edit: May 27, 2020, 11:02:26 PM by Oyley

Offline Oyley

  • CB500X Master
  • ****
  • Posts: 526
  • Bike: CB500x 2019
  • Country: gb
Re: Help Me Accessories My 2020
Reply #115 on: May 27, 2020, 11:04:52 PM
Also...did you check out that $160 centre stand that someone mentioned?

Offline Ruggybuggy

  • CB500X Pro
  • ***
  • Topic Author
  • Posts: 296
  • Country: ca
Re: Help Me Accessories My 2020
Reply #116 on: May 27, 2020, 11:05:45 PM
Pin diameter is the same.  They are slightly wider in width so you have to grind the peg on the opposite side from the spring then remove the lump on the back so they sit flat. 

Not sure if I painted a good picture?

Offline Ruggybuggy

  • CB500X Pro
  • ***
  • Topic Author
  • Posts: 296
  • Country: ca
Re: Help Me Accessories My 2020
Reply #117 on: May 27, 2020, 11:07:57 PM
*Originally Posted by Oyley [+]
Also...did you check out that $160 centre stand that someone mentioned?

I asked for a link but never got a reply.  I also emailed my selling dealer again about the price online but they haven't got back to me. 

Offline Oyley

  • CB500X Master
  • ****
  • Posts: 526
  • Bike: CB500x 2019
  • Country: gb
Re: Help Me Accessories My 2020
Reply #118 on: May 27, 2020, 11:10:40 PM
The lump on the back being the bit that sits against the back of the 'U' that determines the horizontal angle of the peg?

Offline Ruggybuggy

  • CB500X Pro
  • ***
  • Topic Author
  • Posts: 296
  • Country: ca
Re: Help Me Accessories My 2020
Reply #119 on: May 28, 2020, 12:11:16 AM
Correct.